Wet Underfloor Heating System Cheshire

Warm water underfloor heating systems provide the luxury of warmth underfoot and are known to be one of the most efficient methods of heating your home. Find out everything you need to know about warm water underfloor heating systems below.

Wet Underfloor Heating System

We provide wet underfloor heating systems in Cheshire that utilise the concept of ‘heat rises’, making our underfloor heating a great alternative over traditional radiators. Our systems pump warm water through pipes under the floor and distribute heat evenly in the area from below.

Choose Omnia for Wet Underfloor Heating Systems

Luxury Underfoot

When you think of underfloor heating you think ‘luxury’. Warm hotel bathroom floors beneath your feet, heating them up to the right temperature. You could indulge in this luxury every day in the comfort of your own home. Wet underfloor heating systems are a great alternative over traditional radiators and are proven to be 25% more efficient.

Tailored Solutions

Our wet underfloor heating systems are tailored to your needs. Whether you’re installing underfloor heating in one room, several or across a whole house, we’ll listen to your requirements and design a bespoke solution.

Total Control

Fancy controlling your heating from your smartphone? Well you can! Our wet underfloor heating systems can be combined with any smart control system and we can advise, supply and install a solution as part of our service. We’re also approved installers for Nest.

What our customers say

Wet Underfloor Heating System in Cheshire

We can supply and install a wet underfloor heating system to homeowners across Cheshire and offer a free site survey and quote. Contact us to find out more.

Highly Efficient

Warm water UFH uses far lower flow temperatures than a traditional radiator system, and because it covers a much larger surface area it is still able to heat the room effectively. For this reason, UFH is around 25% more efficient than an equivalent radiator system. It works by heating your home from the floor upwards keeping your toes nice and warm and your head cool.

Open Plan Living

UFH is an ‘invisible’ heating system as the tube is hidden beneath the floor. This frees up precious wall space, ideal for open plan living and rooms such as kitchens where space is at a premium.


UFH has no exposed hot or sharp edges – a safe option for young children and the elderly. It is also a good choice for allergy sufferers or anyone with asthma as the warmth provided is free from draughts and dust movements that can aggravate these conditions.


With UFH, the heat gently emits upwards from the floor. This gives the luxurious feel of warm feet and a cool head without any cold spots or draughts common with radiator systems. UFH also warms any usually cold floor coverings, such as tiles or engineered wood.

Underfloor Heating FAQ’s

Our underfloor heating systems work by pumping warm water through pipes under the floor, from a heat source such as boiler or heat pump the pipes are embedded in the floor. This is known as a ‘wet’ system. It adopts the principle that heat rises as the warmth from under the floor is radiated into a room.

Yes, underfloor heating is up to 25% cheaper to run than radiators with a condensing boiler and up to 40% cheaper to run with a heat pump, according to EuRay 2005.

We carry out a free home survey so that you can see if your property is suitable for underfloor heating.

We establish what system will best suit your home and be the most cost-effective and least disruptive option for you.

We check for floor heights and areas you want to heat as our systems don’t have to be installed throughout the whole house.

No, any boiler will work. Underfloor heating works with gas, oil and LPG boilers as well as heat pumps.

Yes, you can. For example, we take out the radiators on the ground floor and we then blank all but one feed off and we will use that to run your new UFH system.

It can be, as each room has to be cleared and accessed, so ideally it’s a job best done before you move in. However, if you are just having one room done then it shouldn’t cause too much of a disruption.

The time of installation is different for each floor construction, and we will be able to advise on timescales at the quote stage.

We pressure test each system thoroughly to ensure that there are no leaks. The only way the pipework will leak is if someone else damages the system, for example, by nailing something through the floor. However, if the pipe leaks at the manifold, it is a simple, 5-minute job to repair.

Yes, the pipework is guaranteed for life.

No, installing a thermostat requires electrical work that must be carried out by a Part P qualified electrician.

Yes, it can and it poses many different benefits from decreased energy consumption to free up living space as radiators aren’t needed. Underfloor heating can be used as the primary source of heat as long as the rooms have the right amount of insulation. A heat loss calculation needs to be made to establish how much heat is needed to heat each room and whether the insulation levels allow underfloor heating to use a whole-house system. Heat loss calculations are carried out by a builder, architect or a heating engineer. There are also heat loss calculators available online, if you know the information.

Radiators mainly work on the principle of heat convection, not radiation. Air is heated to a high temperature in the range of 65-75 degrees and needs to be moved from the radiator to the rest of the room. This is achieved using thermal currents of hot air moving to the ceiling, cooling and falling to create an air cycle. Underfloor heating systems use considerably less energy than radiator systems, heating the floor mass rather than the air.

Yes, if you are on a new build. However, you won’t be able to if you are renovating.

Yes as this stops the heat from going into the ground.

Yes, if you are on a new build. However, you won’t be able to if you are renovating.

We cover Cheshire, South Manchester, Manchester and Staffordshire, in the UK.

Yes, the best way to operate UFH is to establish the temperature you are comfortable with and we then set the thermostat at that temperature. The system then just looks after itself.

As many as you want, we can heat 1 room up to a full house over 2, 3 or 4 floors, making the possibilities endless. Whatever you need, we will design a system just for you.

Yes. We can install underfloor heating systems in individual zones or controlled all-in-one, giving you the ultimate power and control for your heating and usage.

Yes, there is. We recommend Nest Thermostat that gives you the power to control multiple zones with simply your phone or tablet. However, we have many different other alternatives for you to choose from.

All you need to provide is a name, email and address and we will do the rest.

We have sample products in our office, but special arrangements would need to be made if you actually wanted to see a system.

There is no maximum and it all depends on the system you choose and the final floor covering that you wish to have.

It will work with any floor covering apart from solid wood due to the fact that solid wood is a breathing material and will shrink and expand at different times.

Yes, they are. Warm water underfloor heating systems use lower flow temperatures than a traditional radiator system, and because it covers a larger surface area, it is still able to heat the room effectively. As a result, underfloor heating is around 25% more efficient and effective than a radiator system. It works by heating your home from the floor upwards, keeping your toes nice and warm and your head cool.

On a new build, we set the pipes onto the insulation and it is then screeded over. Depending on the other floors composition, will depend on what system we use.

If you want to save money and energy, and want a heating system that is safer and will avoid clutter in your home or new build, our underfloor heating systems might be ideal for you. We believe that every home should keep you and your family warm in the best possible way, and we think that our warm water underfloor heating systems are a great alternative to provide you with comfort and toasty feet.

Wet Underfloor Heating System Experts

Based in Sandbach, we’ve designed and installed hundreds of wet underfloor heating systems in homes across the Cheshire area.

We’re an award-winning family firm offering bespoke plumbing and heating solutions that include wet underfloor heating systems.

We treat every customer as an individual and design solutions that suit your unique requirements. Our wet underfloor heating systems are a great solution for both new builds and refurbishments. They can be used to heat a whole house or can be combined with an existing traditional central heating system and installed in specific areas making them a great solution for anyone and adding extensions to older properties, such as new kitchens, bathrooms or leisure suites.

As approved Nest Learning Thermostat installers, we can combine the installation of a smart control system with your wet underfloor heating system providing you with ultimate control over your home heating and energy usage, from anywhere in the world.

At Omnia, we’re known for the high quality of our installations and customer service. We’ll be on hand to help every step of the way, including after installation. We want you to be 100% happy with your new wet underfloor heating system.

Get in touch and arrange a free site survey and quote. You can then make an informed choice on your wet underfloor heating system.

Related Services: